RC4WD 1/14 Scale Earth Mover ZW370 Hydraulic Wheel Loader RTR Limited Edition

Englische Beschreibung:

​1/14 Scale Earth Mover ZW370 Hydraulic Wheel Loader RTR (Limited Edition)

Specifications:
CNC Machined Metal Parts
Molded Steel Bucket
10 Channel 2.4Ghz Radio
Optimized Steel Hydraulic System
Scale Operator Station (can fit a driving figure)
137MM Model Special Tires
Reliable Hydraulic Valve and Adjustable Pump
High Pressure Nylon Hoses (OD 4.5mm, ID 2.5mm)
Powder Coated in Red
Brushless System (hydraulic)
40A Brushless ESC with BEC
270KV Brushless Monster Torque Motor
Realistic Non Functional Disk Break
Wheel with Planetary Gearbox Built-in
2 Speed Full Metal Transmission (1:64 and 1:16 gear ratio)
Realistic Full Metal Axles
Run Time is: 30 minutes (5000 mAh Battery)
LiPo Cutoff
Scale: 1:14
Length: 27.9in / 710mm
Width: 9.84in / 250mm
Height: 10.5in / 268mm
Wheel Base: 9.92in / 252mm
Maximum Bucket Height: 18.1in / 461mm
Operating Oil Pressure: 3.50 Bar, 50.75 psi
Maximum Bucket Up and Down Angle: 46 to 64 degrees
Maximum Bucket Left and Right Angle: 38 degrees
Maximum Bucket Force: 40kg / 88lbs
Dead Weight: 16.5kg / 36.3lbs
Total Mass Load: 32kg / 70lbs
Theoretical Rise: 15kg / 33lbs (Boom Lift).Theoretical Traction: 30kg / 66lbs
Hydraulic Pump: Flow 0.8 L / MIN, Rated Pressure 2.5 MPA Ultimate Pressure 5 MPA

What's Included:
1x 1/14 Scale Earth Mover ZW370 Hydraulic Wheel Loader RTR (Limited Edition)

Required Parts:
5000mAh 11.1V 50C 3S1P LiPo Battery Pack with XT60 Plug (Battery size must be no bigger than 140mm in length, 45mm in width, and 25mm in height)
Compatible Battery Charger
4x AA Batteries for Radio (Z-S1718)
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Notes:
While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
ESC Supports bullet Connector.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Battery Size should be within 140x45x25MM (LxWxH).
This JDM Product ships in carton packaging.
The transmission shaft adopts the latest constant angular speed double transmission shaft, which makes the power transmission smoother (Our website videos will complement this content).
The valve is an upgraded version, which is more than double the response and controllability of the old model.
This Product Is Professionally Pre-Assembled.
Manufactured by JDCustoms 30 Days Limited Warranty.